Clarke ENCORE MAX Manuel de l'opérateur télécharger pdf (Page 46)

1-46 CLARKE

ENCORE MAX

PLUG

TO DRAIN SOLUTION TANK

Remove the cover from the solution tank, rotate the handle on the drain plug counterclockwise and then pull up

as shown in figure 61. After the tank has drained, flush out with clean water and reinstall the plug.

Fig. 61

SQUEEGEE CLAMP

SQUEEGEE BLADE REPLACEMENT

Replace if front or rear blades are worn or damaged.

1. Set the parking brake.

2. Turn the key to the on position.

3. Put the Squeegee Blade Switch in the lower position.

4. Turn the key switch to the off position.

5. Remove the rear squeegee assembly.

6. Loosen the strap clamp.

7. Remove the old blades.

Push the new blades in until they are against the top of the squeegee. Retighten clamp

Fig. 60

MAINTENANCE

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 60 61

Pas de commentaire

Clarke ENCORE MAX Manuel de l'opérateur Page 46