Clarke Boost 32 Manuel de l'opérateur télécharger pdf (Page 18)

ENGLISH

Page -18-

Clarke

Operator's Manual (EN) - BOOST 32

How to Clean a Very Dirty Floor

To clean a very dirty floor, follow this procedure:

1. Apply solution to the floor.

2. Do not lower the squeegee.

3. Do not activate the vacuum motor.

4. Lower the brush or pad and scrub the floor.

5. Leave the solution on the floor long enough for the

solution to begin cleaning the floor.

6. Scrub the floor again with additional solution, picking

up all the solution with the squeegee

HOW TO OPERATE THE MACHINE

WARNING: Maintenance and repairs must be done

by authorized personnel only.

WARNING: Always empty the solution tank and

recovery tank before doing any mainte-

nance.

WARNING: Keep all fasteners tight.

These Maintenance Procedures Must Be Done Every Day

Keep the machine clean, it will need fewer repairs and have

longer life.

Do These Procedures When You Begin Your Work

Period

1. Turn off key switch.

2. Machines with on-board chargers -

Unplug charger from AC outlet and wrap cord around

bracket at rear of machine.

3. Machines equipped with remote chargers -

disconnect the plug on the battery charger and the

battery pack connector. Join the connector from the

batteries to the machine cable connector.

4. Make sure the recovery tank lid is on correctly (see figure

20).

5. Make sure the Screen filter over the vacuum motor is

clean and in position (see figure 20).

6. Make sure the valve on the recovery drain hose is clean.

Tightly close the valve.

7. Make sure the brush or pad is in position and

installed correctly

8. Check the installation of the squeegee and

squeegee hose.

MAINTENANCE

Figure 20

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 101 102

Commentaires sur ces manuels

Pas de commentaire

Clarke Boost 32 Manuel de l'opérateur Page 18

Commentaires sur ces manuels

Produits connexes et manuels pour Scrubber Clarke Boost 32