Clarke Boost 32 Manuel de l'opérateur télécharger pdf (Page 11)

ENGLISH

Clarke

Operator's Manual (EN) - BOOST 32 - 11 -

How To Install The Batteries

This machine uses four 6-volt batteries. The batteries

are located in the battery compartment under the

recovery tank.

To Install the batteries, follow this procedure:

1. Turn key switch off.

2. Make sure both tanks are empty.

3. Disconnect the hoses from the recovery tank

(upper tank) & unplug the vac motor and float

switch.

4. Remove the tank support bracket.

5. Remove the recovery tank.

6. Place the batteries in the solution tank as

shown in figure 6a or 6b.

WARNING: Lifting batteries without

help could result in an

injury. Get help to lift the

batteries. The batteries are

heavy.

WARNING: Working with batteries can

be dangerous. Always

wear eye protection and

protective clothing when

working near batteries.

NO SMOKING!

7. Connect the battery cables between

batteries and install long battery cable

assembly as indicated. See figure 6a or 6b.

8. Install the tank, reconnecting hoses and

plugging in vac motor and float switch

connectors. Install tank support bracket.

NOTE: Charge the batteries before using the

machine.

NOTE: Check battery water levels prior to use.

HOW TO PREPARE THE MACHINE

FOR OPERATION

Figure 6a

Figure 6b

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 101 102

Pas de commentaire

Clarke Boost 32 Manuel de l'opérateur Page 11