Clarke 195TE Spécifications télécharger pdf (Page 2)

PRIMARY or INPUT POWER DATA

MIG195TE MIG205TE MIG230TE

Primary Volts 230V/1PH 230V/1PH 230V/1Ph

Primary Amps 24 Amps 24 Amps 28 Amps

Frequency 50 HZ 50 HZ 50Hz

SECONDARY or OUTPUT POWER DATA

Sec. Volts 23-44 V 23-30 V 23-46 V

Max. Sec. Amps 185 185 210

Current Range 30-185 30-185 30-210

DUTY CYCLES

100% 80 Amps 60 Amps 80 Amps

60% 103 Amps 80 Amps 103 Amps

20% 170 Amps -- --

16% -- -- 200 Amps

12% -- 65 Amps --

NOTE: Duty Cycles are rated over a 10 minute period.

Example: If welding with a MIG 205TE at 80amps, a 60% duty cycle applies. This

means that over a 10 minute period, the welding time is 6 minutes, the down time

is 4 minutes.

USABLE WIRE SIZES

Mild Steel Wire 0.6-0.8mm 0.6-0.8mm 0.6-0.8mm

Stainless Steel Wire 0.8mm 0.8mm 0.8mm

Aluminium Wire 0.8mm 0.8mm 0.8mm

USABLE GASES MAIN USES

75% Argon 25% CO

- Thin Sheet Metal, Mild Steel

100% Argon - Welding Aluminium, Stainless Steel

100% CO

- Mild Steel

The details and specifications contained herein, are correct at the time of going to print. However, CLARKE

International reserve the right to change specifications at any time without prior notice. Consult ma-

chines data plate.

WELDER SPECIFICATIONS

1 2 3 4 5 6 7 ... 30 31

Pas de commentaire

Clarke 195TE Spécifications Page 2