Clarke CDM20 Instructions d'exploitation télécharger pdf (Page 11)

CDM-20 Page-10

3. OPERATING INSTRUCTIONS

3.1 MEASURING VOLTAGE

1. Connect the black test lead to the COM jack and the red test lead to the V/Q jack.

2. Set the rotary switch at the desired V or V range position and connect test leads across the source

or load under measurement.

The polarity of the red lead connection will be indicates along with the voltage value when making

DC voltage measurement.

3. When only the figure 1 is displayed, it indicates overrange situation and the higher range has to be

selected

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Pas de commentaire

Clarke CDM20 Instructions d'exploitation Page 11