Clarke CON100 Spécifications

1OPERATING & MAINTENANCEINSTRUCTIONSLS0610Part No. 6460200RECIPROCATING SAWMODEL No. CON100Part No. 6459000RECIPROCATING SAW

10MAINTENANCEWARNING!Before performing any maintenance tasks make sure that the mainsplug has been removed from the mains supply.• After use, clean al

11PARTS & SERVICEFor Spare Parts and Service, please contact your nearest dealer, or CLARKE International,on one of the following numbers.PARTS &a

12PARTS LISTmetItraPrebmuNnoitpircseDelbaliavAerapSasatrapmetItraPrebmuNnoitpircseDelbaliavAerapSasatrap110001NOCPKwercSgnippaTseY2323001NOCPKwercSseY

13VIBRATION EMISSIONSDeclared vibration emission value in accordance with EN12096Measured vibration emission value - a:13.90 m/s2Uncertainty value - K

14You will note that a third value is given in the specification - the highestmeasured reading in a single plane. This is the maximum level of vibrati

15DECLARATION OF CONFORMITYWhen disposing of this product, ensure it is disposed of according to alllocal ordinances. It must not be disposed of with

2Thank you for purchasing this CLARKE Reciprocating Saw.Before attempting to use the reciprocating saw, please read this manualthoroughly and follow t

3GENERAL SAFETY PRECAUTIONSWARNING:As with all machinery, there are certain hazards involved with theiroperation and use. Exercising respect and cauti

4GENERAL SAFETY PRECAUTIONS16. ALWAYS remove plug from electrical outlet whenadjusting, changing parts, or working on the machine.17. NEVER operate ma

5ELECTRICAL CONNECTIONSThis product is provided with a standard 13 amp, 230 volt (50Hz), BS 1363 plug,for connection to a standard, domestic electrica

6BEFORE USEFITTING THE BLADEWARNING!Before removing, or installing a blade, make sure that the mainsplug has been removed from the mains supply.1. Loo

7OPERATIONON/OFF SWITCH1. Slide the trigger switch down andback.The saw will run at the speedselected with the variable speedselector.2. To switch of

8Pendulum action switchnoitisoP dooW lateM scitsalP3stuctsaF- CVP2kcihTseceipkrow-ssalgerbiFcilyrcA1doowylPmuinimulA-draobpihCsuorref-noN-0seceipkroWn

9OPERATIONTIPSCutting wood• Clamp the workpiece securely and remove all nails and metal objects.• Holding the tool with both hands, work with the saw