Clarke CPE130SS Manuel de service Page 5

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 38
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 4
5
2. Safety information
Safe operation of this unit can only be guaranteed if it is properly installed and commissioned in
compliance with the manufacturer’s requirements. General installation and safety instructions for pipeline
and plant construction, as well as the proper use of tools and safety equipment must also be complied
with.
Manufacturer:-
Vent-Axia Limited
Fleming way
Crawley,
West Sussex,
RH10 9YX
Tel 01293 441523
www.vent-axia.com
The product is designed and constructed to withstand the forces encountered during normal use. Use of
the product for any other purpose, or failure to install the product in accordance with these Installation
and Commissioning Instructions, could damage the product, will invalidate the warranty, and may cause
injury or fatality to personnel.
2.1 Access
Ensure safe access before attempting to work on the product. Arrange suitable lifting gear if required.
2.2 Lighting
Ensure adequate lighting, particularly where detailed or intricate work is required.
2.3 Tools and consumables
Before starting work ensure that you have suitable tools and / or consumables available.
2.4 Handling
Manual handling of large and /or heavy products may present a risk of injury. Lifting, pushing, pulling,
carrying or supporting a load by bodily force can cause injury particularly to the back. You are advised to
assess the risks taking into account the task, the individual, the load and the working environment and use
the appropriate handling method depending on the circumstances of the work being done.
2.5 Residual hazards
Many products are not self-draining. Take due care when dismantling or removing the product from an
installation.
2.6 Freezing
Provision must be made to protect products which are not self-draining against frost damage in
environments where they may be exposed to temperatures below freezing point.
2.7 Disposal/Decommissioning
Vent-Axia offer a life time decommissioning service for this product. This is available on a return to base
basis (carriage at users’ cost).
Disposal of any antifreeze water mix should follow the disposal instructions as laid out on the COSHH
Safety Data Sheet on page 37.
Vue de la page 4
1 2 3 4 5 6 7 8 9 10 ... 37 38

Commentaires sur ces manuels

Pas de commentaire