Clarke Ranger 25A Instructions d'exploitation télécharger pdf (Page 9)

TROUBLE SHOOTING

With considerate use, your CLARKE Air Compressor should provide you

with a long and trouble free period of operation. Routine checks should

be made on both the electrical supply as well as on all the compressed

air lines and connections. If any fault appears, the reason for which is not

immediately obvious, we recommend that you contact your local CLARKE

Dealer.

CAUTION Do not attempt any repair or adjustment if you are uncertain as

to how it should be done. If you have any queries, contact your local

CLARKE Dealer.

PROBLEM

PROBABLE CAUSE

REMEDY

Motor windings

burnt out.

Contact your local dealer

for a replacement motor.

Switch off and wait 5

minutes before switching on.

Overload cutout

switch has tripped.

The compressor

stops and will

not start again.

Bad connections. Check electrical

connections.

Clean and tighten as

necessary.

The compressor

does not reach

the set pressure

and overheats

easily.

Compressor head

gasket blown or

valve broken.

Wait for compressor to cool

down, disassemble head

and replace any broken

components. Carefully

clean all sealing surfaces

before reassembling. If in

doubt contact your CLARKE

dealer.

Compressor

does not start.

Air receiver charged Open drain cock to expel

air. Compressor should start

again when pressure

reduces to approx. 95 psi.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Commentaires sur ces manuels

Pas de commentaire

Clarke Ranger 25A Instructions d'exploitation Page 9

Commentaires sur ces manuels

Produits connexes et manuels pour Compresseurs d'air Clarke Ranger 25A